Plate Heat Exchanger (Heat Exchange Plate) for Hydraulic Oil Cooling

Plate heat exchanger for Hydraulic oil cooling(heat exchanger plate)Introduction of plate heat exchanger1. OverviewPlate heat exchanger is a new efficient and compact heat exchanger that has developed and extensively used in the recent decades. It consists of multiple parallel corrugated-surface thin metal sheets that overl

Featured Products

Plate heat exchanger for Hydraulic oil cooling(heat exchanger plate)


Introduction of plate heat exchanger
1. Overview
Plate heat exchanger is a new efficient and compact heat exchanger that has developed and extensively used in the recent decades. It consists of multiple parallel corrugated-surface thin metal sheets that overlap and are then fixed by lamp plates and bolts. The cold working fluid and the hot working fluid flow through the narrow and winding passage made of two neighboring plates alternately and realize cold and heat exchange through the plates separating the two working fluids.
Plate Heat Exchanger for Hydraulic Oil Cooling (heat exchanger plate)



Products  Feature :
1,High Efficiency with Life Cycle Suppor
2,High Heat Transfer Rates
3,Modularity For Flexibility
4,Compact Design
5,Self-Cleaning Action
6,Easy to maintance Component
 
    
    
    
    
    
    
product feature :

The plate heat exchanger consists essentially of heat transfer plates, gaskets and a clamping device. Thanks to its structure and heat exchange principle, it is characterized by compact structure, small floor area, high heat transfer coefficient and operation flexibility, wide application range, small heat loss, easy installation and cleaning, etc. The two mediums have a mean temperature difference as small as 1ºC and heat recovery efficiency higher than 99 percent. Based on the same pressure loss, the plate heat exchanger has, compared with a tubular heat exchanger, a heat transfer coefficient two to four times higher, a one-third floor area and a two-thirds metal consumption. It is therefore an efficient and energy, material and investment saving advanced heat exchanger. It is now widely used in industrial fields such as chemical industry, petrochemical, food, machinery, central heating, metallurgy, power, ships, paper-making, textile, pharmaceutical industry, nuclear industry, sea water desalination and combined heat and power generation to meet the requirements of processes such as cooling, heating, condensation, concentration, sterilization and residual heat recovery. It has become a highly competitive product in the heat exchanger field or evenly has replaced conventional tubular heat exchangers. With its development, it will be used in more and more fields.
Plate Heat Exchanger for Hydraulic Oil Cooling (heat exchanger plate)

Component Materials
Heat-exchange plate: SUS304, SUS316L, SMO254, titanium, nickel, Hastelloy alloy
Gasket : NBR, H-NBR, EPDM, food pad, fluorine rubber, silicon rubber
Frame: Carbon steel, stainless steel, coated stainless steel
Clamping bolt: Galvanized carbon steel, stainless steel
Interface: Rubber, carbon steel, stainless steel
Guide bar: Galvanized carbon steel, stainless steel
 
 Material Description Code Applicable Temperature (degree centigrade ) Anti-corrosive Performance and Applicable Occasions
 NBR N -20~110 Hot air, water, non-polar oil, mineral oil, lubricant and silicone oil, etc.
 EPDM E -50~150 Vapor, polar chemical medium, alcohol, weak acid, weak alkali and oxidizing agent, etc.
CR C -40~100 Ammonia, mineral oil and lubricant, etc.
 Fluorine Rubber F 0~180 Inorganic acid, alkali, mineral oil and Haloalkane, etc.
 Silicon Rubber Q -65~230 Resistant to cold current and dry hot

Plate Heat Exchanger for Hydraulic Oil Cooling (heat exchanger plate)

Usage parameter :
Design temperature : 180  ºC
Design pressure : 16 bar           
Please provide the following working parameters, we will provide you with professional design and selection Suggestions.
Capacity (Kw/Kcal/h)
Hot side medium Cold side medium 
Flow rate                               Flow rate                                                                             
Inlet temperature Inlet temperature 
outlet temperature outlet temperature 
Working pressure Working pressure 
Allowable prssure drop Allowable prssure drop 
 

Contact:  Seana

 Mobile:+86 13802722945  
 
Web:jm-heat-exchanger.en.made-in-china.com
Tel:+86-20-82249117
 Fax:+86-20-82031613


The sheet is of unique linear and planar positioning structure, which can reduce the possibility for inter-sheet malposition;     
 Fillets in the sheet are of "Interlocked" structure which allows for mutual interlocking of sheets.
The herringbone corrugated sheet is featured by high heat transfer efficiency; in addition, net-shaped contacts are formed in mutually reverse directions after the entire machine is assembled, featuring good pressure resistance. Introduction to Sealing Gasket      Sealing gasket is inserted and fixed to the slot in heat-exchanging sheet, featuring easy insertion and replacement of sealing gasket, which can substantially reduce stoppage time.      Sealing function is separated from fixing function. Even if some "clamps" with fixing function fail, the gasket can still have sealing function in the slot. Application : HVAC(constant-temperature swimming pool, solar energy ,domestic water , air condition and heating ), textile printing & dyeing industry, pharmacy, food , chemical , paper making , steel and electromechanical and so on .

Plate Heat Exchanger for Hydraulic Oil Cooling (heat exchanger plate)

About Warranty We promise 10 year guarantee, all reasonable relevant cost will be undertaken by us in the first year if our heat exchanger fail to work due to quality problem, only the free repairing operation guide  is available in the rest of the 9 years via E-mail /Fax/Phone

Contact Me:
Seana  
M :0086-13802722945 
T :0086-20-82249117
F: 0086-20-82031613


Products+workshop+certificate :   

Plate Heat Exchanger for Hydraulic Oil Cooling (heat exchanger plate)
 
 
 
Please provide the following working parameters, we will provide you with professional design and selection Suggestions.
Capacity (Kw/Kcal/h)
Hot side medium Cold side medium 
Flow rate                               Flow rate                                                                             
Inlet temperature Inlet temperature 
outlet temperature outlet temperature 
Working pressure Working pressure 
Allowable prssure drop Allowable prssure drop 
 

Contact:  Seana

 Mobile:+86 13802722945  
 
Web:jm-heat-exchanger.en.made-in-china.com
Tel:+86-20-82249117
 Fax:+86-20-82031613

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours