Diesel fuel sample showing water and sediment contamination. (Photo: U.S. Coast Guard)
A towing vessel operating in a pushing-ahead configuration experienced a loss of all propulsion while operating on the Mississippi River. The loss of propulsion occurred approximately three hours after getting underway and about 3.5 hours after receiving fuel from a shore-side facility. Fortunately, there was no significant damage to the vessel, nor injuries to crewmembers because of this casualty.
The subsequent investigation into the causal factors revealed that the vessel’s fuel tanks and fuel service system to the engine were heavily contaminated by water. The amount of water contamination was so significant that the vessel’s engines initially suffered a reduction in power and eventually shut down completely, resulting in a total loss of propulsion.
Since ships began using liquid fuels more than 100 years ago, vessel operators and engineers have long known the hazards associated with contaminated fuel. Fortunately, advancements in fuel quality standards and onboard purification/filtration systems have resulted in less-frequent casualties resulting directly from fuel contamination. However, improvements have also been made in engine designs, resulting in precise machining and smaller clearances in parts such as fuel pumps, bearings, cylinders, burners and injectors. Contaminants such as sediment and water can have detrimental impacts on equipment designed to operate on clean, water-free fuel. In addition, because fuel is constantly consumed while the vessel is operating, continuous vigilance in fuel procurement, as well as system operations and maintenance, is required to maintain a quality fuel program.
Large ships often have the benefit of having the space and power available to operate centrifugal purifiers to ensure high fuel quality is maintained. This is frequently not the case for smaller vessels that operate only on rivers or lakes. Those vessels often only have one or two filters installed directly in the fuel supply line and those types of filters are not as efficient as centrifugal purifiers for removing water.
The effects of water and other contaminants in fuel systems can be detrimental to the operation of any vessel. From large commercial ships operating internationally, to inland towing vessels and recreational boats, failure to ensure a supply of fuel free of water and contaminants can have devastating consequences.
The Coast Guard strongly recommends that vessel Owners and Operators:
Casualty investigators, marine surveyors and inspection personnel are encouraged to maintain an acute awareness to these issues and initiate corrective actions as needed.
North Kingstown, R.I. shipyard Senesco Marine said it has been selected by the Maine Department of Transportation to build…
Forecasters on Thursday amped up their outlook for the U.S. Atlantic hurricane season, saying warm sea temperatures and the…
A 180,000-square-meter-capacity liquefied natural gas (LNG) carrier is said to be the world's first large cargo ship to cross…
Iran urged Greece on Tuesday to cooperate to resolve a crisis over the seizure of ships without involving the United States…
Discover CFD software that functions as a virtual towing tank, highly automated and fully dedicated to marine design.
Military Sealift Command is hiring experienced mariners.
When performing maintenance on your engine, make sure you achieve optimal results using original parts and consumables.
Learn how simulation aids the design of electric propulsion systems in this free on-demand webinar
Subscribe for Maritime Reporter E-News
Maritime Reporter E-News is the maritime industry's largest circulation and most authoritative ENews Service, delivered to your Email five times per week
© 1996-2022 Maritime Activity Reports, Inc.